July 13, 2020 @ 8:00 am – July 15, 2020 @ 3:15 pm America/New York Timezone
MLC Training Center
4356 Communications Dr
Norcross, GA 30093
Kara Bailey
(770) 662-3607


AutoChem II 2920 Operator Training

Click here to download full course details



This course introduces students to the components, operation, and theory of the
AutoChem II for surface area and porosity analysis.
At the end of this course, you will:

  • Be able to identify and power up the system, including installation of the operating
  • Be able to properly weigh the sample tube with and without sample, determine
    sample amount required and properly load a sample into the Instrument.
  • Understand the basic fundamentals of chemisorption and the basic operation of a
    dynamic (flowing gas) analysis system.
  • Be able to use the computer and operational software to perform an analysis on a
    reference material.
  • Be able to properly configure a report format, overlay sample data, and obtain
    analysis information according to your laboratory requirements.
  • Be able to make all user level repairs, adjustments and checks, and locate
    equipment problems using the Troubleshooting section of the Operator’s manual.



Required Background
To successfully complete this course, you must:

  • Have some minimal exposure to an AutoChem II in a laboratory environment.
  • Have reviewed the Operator’s manual.

Required Materials
The following provided materials will help you successfully complete this course:

  • Laboratory Practical Exercise Guide with Lecture Presentations
  • Notepad, Pen and Highlighter
  • Micromeritics Thumb Drive

Additional Print Resources
The following publications will also be provided:

  • Webb, Paul A. and Clyde Orr. Analytical Methods in Fine Particle Technology. Norcross, Georgia,
    U.S.A.: Micromeritics Instrument Corporation, 1997.
  • Related Application Notes and Technical Tips.


Click Here to Register for This Course